Tips The best care is good and true mobile phone
Mobile phones (cell phones) is a tool that really support our daily activities, especially now that mobile phones is growing rapidly both in terms of technology and appearance. Mobile phones should always be ready wherever and whenever required. Therefore mobile phones should always be treated for durability to it in need of some care for durability as how to care for your phone:
* Use protective gloves to avoid scratches or dirt as well. Also the risk of collisions or falls can be minimized.
* Keep away from wet, damp or wet.
* Keep away from hot areas, temperatures above 35 degrees.
* Avoid collision with hard objects or dropped.
* Store in the not exposed to direct sunlight.
* Do not be put near a floppy disk because the waves emitted by mobile phones can damage the diskette.
* For charging is better done when the phone is turned off for charging conditions can walk perfectly.
* Replace the battery if it is dropped / not working normally. Symptoms drop the battery heat up quickly, takes a long time / more time charged, rapidly depleted, and unstable (indicator bar up and down).
* Avoid using fake casing due to its position that does not fit and can make phone pinched or pressed.
* Too often mutually simcard will cause the simcard holder or simholder become loose.
* Clean your phone regularly from dust, dirt, stains / oils by using a soft cleaning cloth, dry and absorb water. Such as cotton fabric. Clean the outside and the phone.
For more on the treatment of mobile phone parts, follows below:
Cashing mobile
Try to use gloves or cashing lether case to avoid dirt, dust, water and scratches. Clean regularly so dirt does not rust. If you intend to sell the phones back, keep its original casing and replaced temporarily stored with another casing so resale value does not fall.
Mobile phone keypad
Regularly clean the dirt, the dust-gap dicelah keypad. Do not take in water because it can cause corrosion or fungal growth. The possibility of corrosion caused by dirty or keypad is a keypad hang or one of the buttons do not work. Avoid pressing the keypad with the coarse, gently press the keypad. When the phone is stored or not used for awhile, always position your phone in a mode "keypad locked" phone to stay safe if the button depressed. Avoid using a false case due to its position that does not fit, it could cause some hard buttons pressed.
Screen / LCD (Liquid Crystal Display) phones
There are several types of LCDs used for cell phones today, such as: Monochrome, STN, CSTN, OLED, UBC, UFB, TFT and TFD. Each course has a light intensity, color and durability are not the same. LCD should receive special attention given the spare parts are quite expensive, especially the touch screen, reparasinya costs are also not cheap. So that the screen does not quickly wear out, switch the function timeout and existing power management, so that when not in use for a while the screen is dimmed. Avoid screen to not collide, fall, depressed or scratched. Use a screen protector to protect the screen. Do not be put into place that are very hot or cold or under direct sunlight. That could result in decreased quality of the LCD. Clean the screen with a soft cloth or cotton cloth to avoid scratches on the glass screen.
Mobile phone battery
Each phone has a charge time is different, the length can be 1 / 2 hour to 3 hours. There are good batteries in a state of dicas pengecasannya phone died so perfect. Avoid battery does not overheat during use, bumped / dropped or exposed to water. To maintain the performance of batteries in order not to decrease drastically, first turn off your phone before unplugging the battery. For NiCad or NiMH type batteries must be charged in the state of the battery is completely discharged, it should also be charged until complete / full so that the battery is not quickly broken. Keep the battery connector is not exposed to metal objects because it can cause a short circuit. Lepaslah battery if the phone is not used for a long time and do not put the battery under direct sunlight.
Mobile phone charger
Position / charger to the socket outlet should be straight and not rocking / loose so as not arising out of excessive heat. When not being used, do not leave the charger plugged in the socket because it will reduce its capabilities. For NiCad and NiMH type batteries, when charged cell phones should be switched off so that the battery and charger remain durable. Chargers do not get dropped or broken, avoid from wet or exposed to water. Do not forget, also clean the charger when the dusty / dirty.
Camera phone
Especially for an integrated mobile device camera. Avoid humid conditions, wet and dusty. Do not bump into something hard, dropped or scratched, especially the glass. Clean the glass is dusty or dirty camera by using a soft cloth, dry and easy to absorb water, like a rag used for regular camera or glasses. Do not use tissue or cotton because of the glass the camera only gets dirty.
Memory Cards
Specifically for mobile phones equipped with a memory card. Do not often pull out a memory card with a sudden, because it can lead to corrupt memory or system error. Avoid memory is too packed with files, leaving a space about 15% to mobile phones and memory cards could breathe. If the memory card is not in use, keep the place a cool, dry, not dusty, not affected by the load, not exposed to heat or magnetic fields. Should be stored with the crib.
so hopefully the info from trit ne ane benefit agan2
sorry if gan
but given
No comments:
Post a Comment